Multipack of ICP-OES test vials and codes allowing you testing your water for 6 times.
Based on many years of experience, we have developed the best water parameters for marine tanks that allow animals to grow healthy and provide them vivid colouration. It’s easy! Send us a water sample and after thorough analysis we will tell you how to make your tank even more beautiful.
Analysing the results of the ICP-OES test, our system will select products which supplementation will allow you to achieve the suggested values of elements. In addition to the results of this amazingly detailed test, you’ll also get a suggested supplementation strategy from us.
Thanks to the detailed analysis, you will be able to provide optimal conditions for the development of corals and other marine organisms. Remember that slowed-down growth, algae blooms or weaker colouration of corals suggest that something bad is happening in the tank.
If look for other water testing, may click from here Aquaforest ICP Test 1 & Aquaforest ICP test 2
Gives you 38 parameter results using 10ml of water, all within 1 week !
Li, Si, I, Ba, Mo, Ni, Mn, Be, Cr, Co, Fe, V, Zn, Hg, Se, Cd, Sn, Sb, As, Al, Pb, Ti, Cu , La, Sc, W, Na, Ca, Mg, K, Br, B, Sr, S, P, PO4 + salinity and KH!
ICP-OES test designed to thoroughly analyse parameters of saltwater from your tank and your RO water. The set contains 2a test vial, individual test code and an envelope for shipping the test to our laboratory. Single ICP-OES test provides accurate results of 38 parameters analysis. In our laboratory we examine: Li, Si, I, Ba, Mo, Ni, Mn, Be, Cr, Co, Fe, V, Zn, Hg, Se, Cd, Sn, Sb, As, Al, Pb, Ti, Cu , La, Sc, W, Na, Ca, Mg, K, Br, B, Sr, S, P, PO4 + salinity and KH!
What is ICP-OES test? ICP-OES (Inductively Coupled Plasma Optical Emission Spectrometry) is a technique used to analyse the composition of many different types of liquid samples, e.g. drinking water, brine or sea water. The Aquaforest Lab owns the highest resolution spectrometer on the market with plasma excitation with a unique, patented optical system made with horizontal and vertical plasma. Wavelength range 130-770 nm. The analysis and processing of the entire spectral spectrum takes only 2 seconds. Thanks to the fast reading system, elemental analysis possible with a sampling frequency of up to 10 Hz.
Why Aquaforest Lab? We own not one, but two of these highly advanced ICP-OES spectrometers meaning that we can perform water tests faster and provide results and solutions for aquarists almost immediately after receiving the sample.
USAGE:
Rinse the test vial twice with the water intended for analysis before collecting the actual sample. Fill the vial with water and make sure, that you close it tightly.
ICP-OES test designed to thoroughly analyse parameters of saltwater from your tank and your RO water. The set contains 2 test vials, individual test code and an envelope for shipping the test to our laboratory. Single ICP-OES test provides accurate results of 38 parameters analysis. In our laboratory we examine: Li, Si, I, Ba, Mo, Ni, Mn, Be, Cr, Co, Fe, V, Zn, Hg, Se, Cd, Sn, Sb, As, Al, Pb, Ti, Cu , La, Sc, W, Na, Ca, Mg, K, Br, B, Sr, S, P, PO4 + salinity and KH!
What is ICP-OES test? ICP-OES (Inductively Coupled Plasma Optical Emission Spectrometry) is a technique used to analyse the composition of many different types of liquid samples, e.g. drinking water, brine or sea water. The Aquaforest Lab owns the highest resolution spectrometer on the market with plasma excitation with a unique, patented optical system made with horizontal and vertical plasma. Wavelength range 130-770 nm. The analysis and processing of the entire spectral spectrum takes only 2 seconds. Thanks to the fast reading system, elemental analysis possible with a sampling frequency of up to 10 Hz.
Why Aquaforest Lab? We own not one, but two of these highly advanced ICP-OES spectrometers meaning that we can perform water tests faster and provide results and solutions for aquarists almost immediately after receiving the sample.
Use your RO water intended for analysis to rinse the red test vial twice, before collecting the actual sample. Use the aquarium water intended for analysis to rinse the blue test vial twice, before collecting the actual sample. Fill the vials and make sure they’re closed tightly.